The checks
Run these together. How to plan a van conversion is the same list as a sequence. What those answers depend on is five inputs: the van, who travels, where and when, time between hookups, and budget. This planner's catalog is Sprinter, Transit, and ProMaster, in North America.
- The van, its real interior, and what it can carry. Make, length, and roof set the box you are building into. A brochure interior is a drawing. Your tape measure replaces it. Payload starts from the door label, or from this catalog until you have that label. How payload is counted. A Sprinter 170 high roof has a worksheet. A Transit high roof has a worksheet. A ProMaster high roof has a worksheet.
- Who travels, and how. One person or two, which seasons, how many nights away from hookups, and what you will not give up. Those are the five inputs. They set the bed, the water, the day's power, and what gets bought now.
- Layout fit, including the doors and the wheel wells. Draw the bed, the galley, and the fridge to scale before the parts that wrap around them. What to buy first. The bed is its own choice: fixed, or a lift. An upright fridge needs a mount into structure, and the vent gaps the manual asks for.
- The day's power, then the battery, solar, and charging. Daily watt-hours come first. Two people and a remote-work day are on the battery-size page. Solar follows the day and the season. The largest load at one moment sets the inverter. Charging while you drive is the alternator and the DC-DC charger.
- Weight against GVWR, and each axle once you can weigh it. You can be under the total and still over on the rear. Per-axle margins wait for empty front and rear scale weights plus the door label's axle ratings. The payload page is that check.
- Budget. Not only the total. Where the money goes first, and what a single added load does to the battery and the materials. How much a van conversion costs is this planner's worked range. The van and your labor sit outside it.
- Build order. Openings and the parts that set dimensions come before insulation, wiring, and cabinets. When to cut the roof.
- One change is enough to move the next number. The sample below adds a roof air conditioner to one Sprinter trip, and the day's power, the battery, the weight, and the budget all move.
Worked sample (planning estimates)
The fridge is the usual example of a choice that does not stay in the galley. On the example plan the fridge is already a chosen part, with a size, a daily energy figure, a weight, and a price. First numbers runs before that model is chosen. It keeps one typical fridge inside the day's power estimate and does not grow the battery from fridge liters. It does rerun the day, the bank, the weight, and the budget when you add a load it models.
The fridge on the example plan. A Sprinter 170 high roof, the same van as the cost page. The fridge is a Dometic CFX5 55IM Fridge/Freezer, about 58 qt (55 L), on a slide under the front of the bed.
Interior on the Sprinter 2500 Cargo 170 High Roof 2D Drawing (edition 907.645.13): 174 in long, 70 in wide, and 79 in high. Drawing states dimensions have a tolerance up to ±3%. It is a size drawing. A tape measure of your van replaces it. The planning bottleneck between the rear wheelhouses on that drawing is 53 in. The model records a published sliding-door opening of 50 by 72 in, and a rear opening of 61 by 73 in.
The fridge box on the layout is 17.9 in wide, 28.3 in deep, and 18.9 in tall. The fit check does not flag it against the wheel wells or the door openings. Other pieces on that layout still have open checks at the sliding door: the the short queen platform and the side bench.
The product page's rated input is stored here as 102 W. The plan uses 18% of that for 24 hours, which comes to 441 Wh a day. That is a planning estimate from the rated current and the duty cycle stored on the part. The part's spec weight is 44 lb. Before a model is chosen, this planner's fridge line is 47 lb, noted as a CFX3-class typical. The example plan prices the fridge at $1,200. Confirm the price with the seller.
Of the weight that is placed on the example plan, about 582 lb is in the front third, 683 lb in the middle, and 788 lb in the rear. About 595 lb is not placed yet, so it is not in that split. About 38% of the placed weight sits in the rear third. That leaves about 1,144 lb of the planning payload. These are planning estimates. A scale ticket replaces them.
Adding one modeled load. Sprinter 170, high roof, 2 adults, longer trips, all four seasons, induction cooking, and an indoor shower. Some nights off-grid. No working from the van. These are planning estimates, the same math first numbers uses. Planning payload before the build is 3,792 lb.
| This trip | Add a roof air conditioner | |
|---|---|---|
| Daily energy | 2,850 Wh | 4,850 Wh |
| Battery | 500 Ah | 800 Ah |
| Solar | 800 W | 800 W |
| Inverter | 2,000 W | 3,000 W |
| Charging while driving | 50 A | 50 A |
| Payload left | 1,026 lb | 626 lb |
| Budget | $17,668 to $23,890 | $25,006 to $34,308 |
Solar stays at 800 W. That is the roof this van is given in the catalog, and the extra day does not grow it. The charger stays at 50 A. The battery, the inverter, the pounds left, and the budget all move. The battery line goes from 155 lb to 248 lb. The air conditioner adds 72 lb. The inverter goes from 25 lb to 40 lb. Materials step from 1,210 lb (typical) to 1,430 lb (full-featured). The budget for that same change.
The drawing lists a front GAWR of 4,101 lb and a rear GAWR of 5,359 lb. Your door label replaces both. This sample has no per-axle margin, because empty front and rear scale weights were not entered. The worksheet keeps those ratings next to the payload math.
The example plan runs roof and wall cut-outs, insulation, rough-in, structure, install, and finishes, in that order. The planner's full order also has a prep phase when the van needs one. Its first tasks are the roof solar mounts and the roof fan. When to cut is that step.
How Vansembly does this today
Vansembly is a camper van planner for people converting their own van in North America. A van build planner app keeps the checks above on one plan.
- A conversation about the van, who travels, the climate, and the budget becomes a written brief, plus a list of facts still to measure.
- The layout shows a floor plan, side and rear views, and a 3D view of the same scene. Wheel wells are modeled, with the sliding-door and rear-door openings kept clear.
- When a part or a layout choice changes, the plan shows what else moves: fit, power, weight, water, heat, cost, and build order.
- Daily energy, the battery, solar, alternator charging, and the inverter are sized on that plan. Wire and fuse sizes are there too, as planning estimates to verify before anything is connected.
- Weight is a line-item estimate against GVWR, with a front, middle, and rear split from where items sit. Front and rear axle margins appear once you enter empty axle weights.
- The budget and the parts list follow the choices. Prices are estimates to confirm with the seller.
- The plan becomes a build order: prep, roof and wall cut-outs, insulation, rough-in, structure, install, and finishes, with the reason each task waits on the one before it.
- First numbers runs payload, daily energy, battery, solar, and a budget range from a few answers. No account. A finished Sprinter 170 plan, with the floor plan and the reasons next to the choices, is the example.
When to bring in a professional
The checks are for choosing and budgeting. High-current wiring, shore power, seats and seat belts, a roof or body cut that touches structure, and fuel or exhaust need a qualified person to design or check before you connect or cut. The list tells you which of those your build has, so you can line up help before the parts arrive. Where a planning estimate stops and that design starts is planning estimate versus professional design.