How it works
From van ideas to a plan you can build
A conversion is not one decision but a chain of them, and each one can change the choices around it. Vansembly walks that chain with you: one clear decision, what it changes, then the next.
Sprinter 170, high roof
2 adults, longer trips, all four seasons, induction cooking and an indoor shower
- Payload reserve
- 1,026 lb
- Planning range 571 to 1,280 lb
- Battery, solar, and inverter
- Battery 500 Ah (6.4 kWh) · Solar 800 W · Inverter 2,000 W
- Sized for 2,850 Wh a day, 13 fused cable runs. Planning sizes. The parts list carries a 2,400 W continuous inverter in this class.
- Honest budget
- $17,668 to $23,890
- The high end adds a 20% contingency ($3,534) and $2,688 for a premium or heated battery.
- Parts list
- 15 parts
- $11,108 in the components total above
- Build order
- about 632 to 1,000 hours
- 27 tasks in 6 phases
Planning estimates to verify.
Open the full example planSeven steps
Every step below is in the product today
Each step says what it produces and what still needs a measurement or a check. Some steps ask more of you than others; the plan says which.
Step 1 of 7
Intake: start with your van and your life
Begin with the facts and goals that make this build yours, not a template. The more you already know the better, and the rest goes on a list of things to confirm.
- Van make, model, year, wheelbase, roof height, and configuration
- Who travels in it, and for how long
- Climate, terrain, and travel style
- Sleeping, cooking, seating, storage, and work
- Skills, tools, timeline, and budget goals
- Known measurements, purchases, and non-negotiables
Vehicle support covers Mercedes-Benz Sprinter, Ford Transit and Ram ProMaster. Coverage varies by exact configuration.
Produces
A shared starting point, plus a clear list of facts that still need confirmation.
Step 2 of 7
Requirements: decide what the build must do
Ideas get useful once they are written as requirements: must-haves, preferences, limits, and open questions. "A comfortable galley" becomes fridge capacity, counter space, water use, ventilation, aisle clearance, and power, which makes later choices easier to compare and easier to explain.
Produces
Prioritized requirements and decision criteria for the rest of the build.
Step 3 of 7
Layout: make the whole space work together
Work through zones for sleeping, cooking, storage, seating, utilities, and moving around, as one space rather than boxes on a floor plan. A larger galley may cost aisle or storage, and a fixed bed gives you a garage but takes seating; Vansembly keeps those relationships visible as the layout develops.
Produces
A layout direction, key dimensions to verify, and the tradeoffs you have accepted.
Step 4 of 7
Products: compare components against the plan
A fridge, heater, fan, battery, tank, or window is not "best" on its own; it is a better or worse fit for your build. Vansembly brings relevant specifications and sourced comparisons into the decision, and shows where information is missing or uncertain.
Product details and availability change; the maker's documentation stays the authority on current details and installation requirements.
Produces
Candidate products, reasons for each choice, source references, and checks to complete before purchase.
Step 5 of 7
Conflicts and tradeoffs: see what changes
Connected plans need connected checks. When a product or layout decision changes, Vansembly shows what it can affect:
- Physical fit and service access
- Electrical demand and system sizing
- Weight and weight distribution
- Water, ventilation, heating, or cooling
- Cost and procurement
- Installation order
- Requirements you have already set
Some conflicts can be flagged from reliable specifications. Others need a real measurement, a current manual, or professional review, and the plan says which. Not every conflict will be found.
Produces
Visible consequences, open checks, and an informed decision rather than false certainty.
Step 6 of 7
Sequence: turn the plan into build order
A good component choice can still mean rework if it goes in at the wrong time. Vansembly arranges the work around dependencies, with hold points for checks and a sequence that stays editable, because real builds rarely follow the first plan exactly.
What has to happen before the next task can begin:
- Measured
- Ordered
- Routed
- Framed
- Tested or inspected
Electrical sizing, routing notes and diagrams in the sequence are planning estimates. Check them against current manufacturer instructions, the applicable codes and a qualified professional before you buy, cut or connect.
Produces
A practical next-actions list and a build sequence that explains why the order matters.
Step 7 of 7
Install plan: keep deciding as reality changes
The plan comes into the workshop with you. Mark each task started or done, with dates and notes; record a real measurement; swap a product that went out of stock. When a fact behind a task changes, the related tasks are flagged for a look rather than letting the plan drift out of date.
Vansembly records the work; it does not perform or inspect it.
Produces
A living record of the build and a clear next decision.
One example
One example: choosing a fridge
A fridge choice can look isolated. It is not.
- Capacity requirement
- set by your travel style and food-storage needs.
- Galley and aisle
- set by the candidate's dimensions.
- Cabinet design
- set by ventilation and service clearances.
- Electrical planning
- set by power demand, as planning estimates to verify.
- Budget and procurement
- set by price and lead time; confirm current seller terms before buying.
- Build order
- final dimensions decide when the cabinet can be built.
Vansembly's role is to help you follow those connections, record why you chose what you chose, and flag what still needs checking. It will not tell you a product is guaranteed to fit when the evidence cannot support that.
Who does what
What you decide, what Vansembly does
You decide
Vansembly helps
Vansembly does not
Planning support, not professional advice. Electrical, weight and fit figures are planning estimates, and AI output can be wrong or incomplete. Verify measurements, current manufacturer documentation, product compatibility, local codes and permit requirements. Use a qualified professional for safety-critical design, installation and inspection. Vansembly does not inspect or certify your build, and it does not claim ABYC or code compliance for it.
Questions first? Read the FAQ.