Features

Everything your van build plan needs, in one place

Layout, parts, electrical, weight, budget and build order, connected so you can see what each choice affects. For DIY Mercedes-Benz Sprinter, Ford Transit and Ram ProMaster conversions.

Sprinter 170, high roof

2 adults, longer trips, all four seasons, induction cooking and an indoor shower

Example plan
Payload reserve
1,026 lb
Planning range 571 to 1,280 lb
Battery, solar, and inverter
Battery 500 Ah (6.4 kWh) · Solar 800 W · Inverter 2,000 W
Sized for 2,850 Wh a day, 13 fused cable runs. Planning sizes. The parts list carries a 2,400 W continuous inverter in this class.
Honest budget
$17,668 to $23,890
The high end adds a 20% contingency ($3,534) and $2,688 for a premium or heated battery.
Parts list
15 parts
$11,108 in the components total above
Build order
about 632 to 1,000 hours
27 tasks in 6 phases

Planning estimates to verify.

Open the full example plan

Vansembly features

  1. Guided build consultation and requirements

    A conversation about your van, budget, climate and travel style becomes a written build brief with prioritized requirements and open questions.

    • Van make, length, roof height and configuration
    • Who travels, for how long, in what climate
    • Must-haves, preferences, limits and budget
    • A list of facts still to measure or confirm
  2. 3D van layout planner and floor plan

    A measured layout studio with a top-down 2D floor plan, driver, passenger and rear elevations, a 3D view and a split view of the same scene.

    • Dimensioned 2D floor plan and side and rear elevations
    • Interactive 3D view of the van interior
    • Modeled wheel wells, with sliding-door and rear-door openings kept clear
    • Bed, galley, bench, wet bath, storage and custom items placed to scale
    • Galley (kitchen) designer for counters, sink, stove and fridge
    See the example in 3D
  3. Component research and comparison

    Fridges, heaters, fans, batteries, solar, tanks and other parts are compared against your requirements, with specifications and sources.

    • Candidates compared on fit to your build, not a generic "best"
    • Specifications, dimensions and power draw carried into the plan
    • Sources cited, with missing or uncertain data called out
    • The reason for each choice saved with the decision
    Follow one decision
  4. Conflict and tradeoff checks

    When a part or layout choice changes, Vansembly shows what it affects: fit and service access, power, weight, water, heat, cost and build order.

    • Physical fit and clearance checks against the layout
    • Power, weight and budget consequences of each choice
    • Open checks that need a measurement, a manual or a professional
  5. Electrical system planning

    Load estimates, battery, solar and charging sizing, wire gauge and fuse sizing, a system diagram and an electrical parts list, as planning estimates to verify.

    • Daily energy budget from your appliances
    • Battery bank, solar array, DC-DC and inverter sizing
    • Wire gauge, voltage drop and fuse sizing per circuit
    • System wiring diagram and electrical bill of materials
    See the example electrical plan
  6. Weight and weight distribution

    Build weight estimates against your van's GVWR, with a front, middle and rear split from where items sit in the layout and axle margins once you enter axle weights.

    • Line-item weight estimates with a planning range
    • Payload margin against GVWR
    • Front, mid and rear weight distribution from placed items
    • Front and rear axle margins (GAWR) from your measured empty axle weights
    See the example weight plan
  7. Step-by-step build order

    Your plan becomes an ordered build sequence: prep, roof and wall cut-outs, insulation, rough-in, structure, install and finishes, with tasks, dependencies, tools, skill level and time estimates.

    • Seven build phases in dependency order
    • Tasks with tools required and DIY or pro skill level
    • DIY and professional hour estimates
    • Why each task has to happen before the next
  8. Install plan with build progress

    The build order becomes an install plan you work through: mark each task started or done, with dates and notes, and see what still needs a check when a part or measurement changes.

    • Each task marked not started, in progress or done, with dates
    • Notes on what was installed and what changed on the day
    • Work already in the van recorded as done before planning starts
    • Tasks flagged for review when the facts behind them change
  9. Budget and parts list

    A running budget and parts list for the build, tied to the components you chose.

    • Estimated cost by system and in total
    • Parts list linked to each decision
    • Prices treated as estimates to confirm with the seller
    See the example budget
  10. AI co-builder that remembers your build

    A build-specific AI assistant that knows your van, your requirements and every decision so far, and keeps the reasons behind them.

    • Every conversation is tied to your build
    • Decisions keep their reasons, sources and open checks
    • Concept images of your interior
  11. Shareable and printable build plan

    Share a read-only link to your plan or print it for the workshop.

    • Read-only share link
    • Print-ready plan with layout, electrical, weight and build order
    Open the example plan
  12. First numbers for your van before you sign up

    Answer five questions about your van and how you travel to see a payload reserve, a daily energy budget, starting battery and solar sizes and a budget range, worked out the same way your full plan is.

    • Sprinter, Transit and ProMaster lengths and roof heights
    • Who travels, which seasons, how often off hookups and the big choices (kitchen, shower, working aboard, air conditioning)
    • Every number explained in one line, as a planning estimate
    • Your answers carry into your starting brief when you create an account in the same browser
    Get your first numbers

Plainly

What Vansembly does not do

  • Vansembly does not inspect or certify the work in the van; the install plan records what you did, it does not check it.
  • Augmented reality (AR) placement is not available.
  • Vansembly does not provide video tutorials or detailed carpentry instructions; it gives the order of work, tools and skill level for each task.
  • Vansembly is planning software, not certified engineering: electrical, weight and fit numbers are estimates to verify, and it does not certify ABYC or code compliance.
  • Product prices are not a guaranteed live feed; confirm price and stock with the seller.

Planning support, not professional advice. Electrical, weight and fit figures are planning estimates. Verify measurements, current manufacturer documentation and local codes, and use a qualified professional for safety-critical work. How it works.

Plan the whole van, not one piece of it

One conversation turns what you know into a starting brief and shows you your plan before you pay for anything.

Start your build

Have your van's make, length and roof handy if you know them.