Answers

How much does a van conversion weigh?

Updated

For a DIY Sprinter 170, high roof, 2 adults, longer trips, all four seasons, induction cooking, and an indoor shower, this planner adds 2,766 lb. The planning range is 2,512 to 3,020 lb. That is the build, full fresh water, people, and gear together. It is a planning estimate from the Vansembly planner catalog. It is not a scale ticket. Weigh the van on a scale, and read the GVWR and both GAWRs on the door label.

Get these numbers for your own van, no account needed.

How the total is built

A van conversion weight in this planner is every pound the build adds: structure, parts, water, people, and gear. Curb weight stays with the van. How much a van build weighs depends on the van, who travels, the water, and the trip. This page is one worked sample. How much a van conversion costs is the budget for the same sample.

The lines are the weight engine's own labels and pounds, from this planner's North America catalog. Estimated lines carry a ±20% planning band. Fresh water and the people line are fixed and carry no band. Those bands combine root-sum-square into one planning range on the total.

A van conversion weight calculator for your own van is first numbers. It reruns these lines for the van and the trip you enter, next to the power and the budget. No account.

Worked sample (planning estimates)

Sprinter 170, high roof, 2 adults, longer trips, all four seasons, induction cooking, and an indoor shower. This is the Sprinter 170 example the cost page uses. These are planning estimates from the Vansembly planner catalog, the same math first numbers uses.

CategoryLinePlanning estimate (lb)
Insulation, floor, paneling, framing, cabinetry, and bedBuild materials (typical preset)1,210
Electrical500Ah LiFePO4 bank155
Electrical2,000 W inverter25
Electrical800W solar array + mounts136
ElectricalSmall electrical parts55
Electrical371
Galley12V fridge47
GalleyInduction cooktop6
Galley53
Heating and fanDiesel heater (installed)18
Heating and fanRoof vent fan16
Heating and fan34
WaterFresh water, full (40 gal)334
WaterWater tanks (empty shells)45
WaterWater pump4
Water383
Roof rackRoof rack75
PeoplePeople (2 × 170 lb)340
GearGear & supplies (2 × 150 lb)300
Total2,766
Planning range2,512 to 3,020

The structure row is one catalog line, "Build materials (typical preset)", 1,210 lb. Insulation, the floor, paneling, framing, cabinetry, and the bed share it. The engine's note: "structure only: insulation, floor, paneling, framing, cabinetry, bed. Electrical gear and appliances are their own lines."

Electrical is 371 lb across four lines. "500Ah LiFePO4 bank" is 155 lb. The note: "weight follows watt-hours (Battle Born 12 V class); a higher voltage does not cut the weight." "2,000 W inverter" is 25 lb. The note: "class-typical." "800W solar array + mounts" is 136 lb. The note: "0.17 lb/W installed." "Small electrical parts" is 55 lb. The note: "MPPT, DC-DC, cable, fuses, bus, and shunt, about 55 lb."

The galley is 53 lb. "12V fridge" is 47 lb. The note: "CFX3-class typical." "Induction cooktop" is 6 lb. The note: "portable induction class, about 6 lb."

Heating and the fan are 34 lb. "Diesel heater (installed)" is 18 lb. The note: "unit + kit + ducting." "Roof vent fan" is 16 lb. The note: "MaxxFan-class typical." "Roof rack" is 75 lb. The note: "rack once solar is past a bare-roof mount, about 75 lb."

Water counts too, 383 lb in this table. "Fresh water, full (40 gal)" is 334 lb. The note: "8.34 lb/gal. RVIA counts fresh full." That is 40 gallons at 8.34 lb per gallon. "Water tanks (empty shells)" is 45 lb. The note: "~0.7 lb per gal capacity, fresh + grey." The fresh tank is 40 gal and the grey tank is 24 gal. The shell line covers both, and only the fresh tank is counted full. "Water pump" is 4 lb. The note: "Shurflo-class." The pump is a component line in the weight engine. It is listed with water here, and its pounds are the same line.

People count too. "People (2 × 170 lb)" is 340 lb. The note: "planning weight per person; fixed, not banded." Gear counts too. "Gear & supplies (2 × 150 lb)" is 300 lb. The note: "trip allowance."

People, fresh water, the tank shells, and gear are 1,019 lb of the 2,766 lb total. The build is the other 1,747 lb, and that includes the pump.

How it compares to payload

How payload is counted. On this sample the planning payload is 3,792 lb. The 2,766 lb total uses about 73% of it and leaves 1,026 lb. The planning range on what is left is 571 to 1,280 lb. People, water, and gear are already inside the 2,766 lb, so they are already out of that leftover.

Your door label replaces the planning payload. Weigh the empty van on a scale, full of fuel, then weigh it again loaded for a trip. Check the total against the door-label GVWR, and check each axle against its GAWR. You can be under the total and still over on an axle. This sample has no per-axle margin, because empty front and rear scale weights were not entered.

A Sprinter 170 high roof has a worksheet. A Transit high roof has a worksheet. A ProMaster high roof has a worksheet. Those pages spend a different longer-trip build: propane cooking and no indoor shower. The table below is this sample, the same trip as the cost page, on three vans in the catalog.

VanAdded (lb)Planning range (lb)Payload (lb)Left (lb)
Sprinter 170 high roof2,7662,512 to 3,0203,7921,026
Transit 148 high roof2,7032,455 to 2,9513,7401,037
ProMaster 136 high roof2,5332,318 to 2,7484,1541,621

On these three, people, fresh water, the tank shells, gear, and the parts other than solar stay the same. The materials line and the solar line are what move. A longer or shorter body is a different payload. The worksheets carry those lengths.

What else moves it

  • Who travels. 170 lb per person in this planner, fixed, not given a band. The payload page uses the same figure.
  • Water. 8.34 lb per gallon. This planner counts fresh full. This sample is 40 gal.
  • Gear. 150 lb per person on this trip. Full-time living uses 300 lb per person in this catalog. This sample uses the trip allowance.
  • A roof air conditioner. On this same trip, what is left of payload goes from 1,026 lb to 626 lb. The unit's own line is 72 lb. The battery, the inverter, and the materials preset move too. That change, with the other checks. The budget for this sample.

How to check yours

  1. Read GVWR and both GAWRs off the driver's door jamb.
  2. Weigh the empty van by axle on a scale, full of fuel, with you aboard. Keep the ticket.
  3. Keep a running list as the build goes in, then weigh it loaded for a real trip.
  4. Or run first numbers for your van. It is the same engine, with your choices instead of this sample.

When to bring in a professional

The total is for choosing and for comparing a plan to payload. Springs change the ride, not the label. If the loaded van is over a label rating, talk to the van maker's upfitter support or a qualified upfitter. Adding or moving seats or seat belts is professional work, and each added seat also comes out of payload. Where a planning estimate stops and that design starts is planning estimate versus professional design.

Ready when you are

See what your own conversion adds in Vansembly, one decision at a time.

Start your build

Have your van's make, length and roof handy if you know them.